OOTP Developments Forums - View Single Post

Mr. HudsonBay · 09-01-2022, 04:12 PM

The best way to correct your issue would be to copy new cameras to your park. Go into SETTINGS, then EDIT BALLPARK, then 3D MODEL, then..

Press the "copy cameras from park" button. From there, you go into the /models folder for the park you want to copy the cameras from (or any previously loaded park--for example, I use \angel_stadium_of_anaheim), then load the .ootp3d file.

You should see a message pop up that tells you how many cameras were copied. You will probably need to adjust some of them, so be sure to cycle through, make sure they are all looking at the field and not obstructed, and save your changes by saving the park.

09-01-2022, 04:12 PM	#186
Mr. HudsonBay Minors (Rookie Ball) Join Date: Jul 2020 Location: Howell, MI Posts: 20	The best way to correct your issue would be to copy new cameras to your park. Go into SETTINGS, then EDIT BALLPARK, then 3D MODEL, then.. Press the "copy cameras from park" button. From there, you go into the /models folder for the park you want to copy the cameras from (or any previously loaded park--for example, I use \angel_stadium_of_anaheim), then load the .ootp3d file. You should see a message pop up that tells you how many cameras were copied. You will probably need to adjust some of them, so be sure to cycle through, make sure they are all looking at the field and not obstructed, and save your changes by saving the park. __________________ "You lollygag the ball around the infield. You lollygag your way down to first. You lollygag in and out of the dugout. You know what that makes you, Larry?” Lollygaggers!