My 3D ballpark models

[Klew1986]

Originally Posted by adion

It looks fine on my machine also. Is the park folder in the Models folder and, also, not in-bedded in another folder.

That was it!. Thanks!

[robedits]

I'm sorry I posted this in another thread...wasn't sure where to post this...I'm playing OOTP18 on Steam.

Adion (or sylvam?)...not sure where to post this. I d-loaded the historical Ballparks and the same thing thatw as happening with 1975 Fenway Park is happening with Ebbets Field 1955...the grid is off...pitchers to the right of the mound, batter's too far to the right,etc.
I cannot the hang of using the 3D ballpark editor (hold mouse and pass 1 for 1B, etc)...doesnt work at all for me. Anyway, I remember one fo you recently adjusted the grid for Fenway so the field/grid was aligned for Fenway historical '75 (or 70-87,I forget).
Would one of you gentlemen mind taking a look at Ebbetts (I think it's 38-57,but I forget...I'm playing 1955 season),re-adjusting the grid (etc) and re-posting it, fixed? I just cant to it...too complicated for the likes of me.
Thanks again
Edited: also, the background behind the fences is an extremely weirdly- blown-up and magnified, not to mention a bright blue, mess of building signs? Is there a different background that can be used for historical Ebbetts? FInally, I don't see any adds on the LF fences and I could swear with OOTP 17 last year the background/fences were different when I played in historical Ebbets circa 1955ish. I"m not sure if the 3D model I'm using (which is from historical BPs for Ebbetts) is loading correctly?
Thansk again

[adion]

Originally Posted by robedits

I'm sorry I posted this in another thread...wasn't sure where to post this...I'm playing OOTP18 on Steam.

Adion (or sylvam?)...not sure where to post this. I d-loaded the historical Ballparks and the same thing thatw as happening with 1975 Fenway Park is happening with Ebbets Field 1955...the grid is off...pitchers to the right of the mound, batter's too far to the right,etc.
I cannot the hang of using the 3D ballpark editor (hold mouse and pass 1 for 1B, etc)...doesnt work at all for me. Anyway, I remember one fo you recently adjusted the grid for Fenway so the field/grid was aligned for Fenway historical '75 (or 70-87,I forget).
Would one of you gentlemen mind taking a look at Ebbetts (I think it's 38-57,but I forget...I'm playing 1955 season),re-adjusting the grid (etc) and re-posting it, fixed? I just cant to it...too complicated for the likes of me.
Thanks again
Edited: also, the background behind the fences is an extremely weirdly- blown-up and magnified, not to mention a bright blue, mess of building signs? Is there a different background that can be used for historical Ebbetts? FInally, I don't see any adds on the LF fences and I could swear with OOTP 17 last year the background/fences were different when I played in historical Ebbets circa 1955ish. I"m not sure if the 3D model I'm using (which is from historical BPs for Ebbetts) is loading correctly?
Thansk again

Please post a screen shot so I can see what you are talking about.

[robedits]

Adion: unfortunately, no matter how many times I try:
A) I print screen while in-game and it always shows my windows desktop when I paste to mspaint. Never captures the game screen
and
B) I've tried to attach jpegs/whatever here previously and the attachment doesnt work....so that's not an option.
Basically, if you remember the somewhat recent grid-alignment issue with Fenway 70-87 (which you...or someone...fixed)...the same thing is happening with Historical Ebbets (**-'57): fielders/battersa are somewhat to the right of where they should be and the green grid (while in 3D mode) is slightly to the right of where it should be, probably resulting in the players being slight off to the right...and also possibly not showing the ads on the LF low-fence.
As for the gigantic,blurred blue background with blue,blurry building signs behind the ballpark fences:maybe that's the way it's supposed to look?
Finally, as important, and most likely having to do with the grid:when playing in Ebbetts 55, the OFers, when retreating deep, go into the stands to catch balls. Or should I say mesh with the stands, or the RF wall. Additionally, I saw a ball hit the middle of the crowd ,low and just over the LF fence, and ping back where the OFer got it. As if it hit a high fence in LF. Perhaps the wrong park is being used here?
I know next to nothing about 3D modeling. What I am able to do is edit ballpark, and install new 3D model, so if there is a correced verison of Ebbetts for 55, I'd love to have one. THansk again, as always.

[endgame]

@robedits

I may have missed it but did you say you were using steam or not ?

If you are it's just a matter of pressing F12 to take a screenshot

[adion]

Originally Posted by robedits

Adion: unfortunately, no matter how many times I try:
A) I print screen while in-game and it always shows my windows desktop when I paste to mspaint. Never captures the game screen
and
B) I've tried to attach jpegs/whatever here previously and the attachment doesnt work....so that's not an option.
Basically, if you remember the somewhat recent grid-alignment issue with Fenway 70-87 (which you...or someone...fixed)...the same thing is happening with Historical Ebbets (**-'57): fielders/battersa are somewhat to the right of where they should be and the green grid (while in 3D mode) is slightly to the right of where it should be, probably resulting in the players being slight off to the right...and also possibly not showing the ads on the LF low-fence.

As for the gigantic,blurred blue background with blue,blurry building signs behind the ballpark fences:maybe that's the way it's supposed to look?
Finally, as important, and most likely having to do with the grid:when playing in Ebbetts 55, the OFers, when retreating deep, go into the stands to catch balls. Or should I say mesh with the stands, or the RF wall. Additionally, I saw a ball hit the middle of the crowd ,low and just over the LF fence, and ping back where the OFer got it. As if it hit a high fence in LF. Perhaps the wrong park is being used here?
I know next to nothing about 3D modeling. What I am able to do is edit ballpark, and install new 3D model, so if there is a correced verison of Ebbetts for 55, I'd love to have one. THansk again, as always.

I am not sure why you can't take a picture. Have you tried the in game screenshot function, F12. That should work and the screenshot will be in the screenshot folder. Then you can attach it here to a post using the Manage Attachments function.

I have checked all my Ebbets folders and all the grids are okay and I am not sure what you are taking about the background. I would have to see it..Another option is that you email the park folder or upload it someplace where I can download it. Other that those things, I don't know what to tell you.

[robedits]

...from one of the crappy pics taken from my crappy cellphone, you can see the grid is off a bit in 3D model.
also, from the F12 within my Steam OOTP18, during the gamne, you can see the deep OFers at historical ebbetts ('38-57 I think) playing past the fence. I did this to give an example of the OFers, even when not playing deep, running THROUGH the fence when chasing deep fly balls Also the weird blue background behind the stadium I was referring to earlier ( see "window tinting"). FInally, I also noticed while at Ebbetts 38-57 in 3D model mode that the LF fence grid does not line up at all with the actual fence (that's the other jpeg).
My other ballparks look just fine from the dozens I've used.
THanks for the F12 tip...appreciated! For some reason,though, the F12 I took when I was in 3D model mode did not allow the grid to be shows, only the controls in 3D (weird). Thus the cellphone snapshot needed.
Thanks again Adion!
Rob

[adion]

Originally Posted by robedits

...from one of the crappy pics taken from my crappy cellphone, you can see the grid is off a bit in 3D model.
also, from the F12 within my Steam OOTP18, during the gamne, you can see the deep OFers at historical ebbetts ('38-57 I think) playing past the fence. I did this to give an example of the OFers, even when not playing deep, running THROUGH the fence when chasing deep fly balls Also the weird blue background behind the stadium I was referring to earlier ( see "window tinting"). FInally, I also noticed while at Ebbetts 38-57 in 3D model mode that the LF fence grid does not line up at all with the actual fence (that's the other jpeg).
My other ballparks look just fine from the dozens I've used.
THanks for the F12 tip...appreciated! For some reason,though, the F12 I took when I was in 3D model mode did not allow the grid to be shows, only the controls in 3D (weird). Thus the cellphone snapshot needed.
Thanks again Adion!
Rob

Okay. I don't have a 38-57 version. It may be an old version I did. Yes, the background is not good. It was the first one I did for Ebbets. I had a hard time finding something that look close to right. I am in the process of updating all the historical parks that Silvam has updated. That should fix will fix the grid issue. I can't fix yours because I don't have that one. I have adjusted the background so it looks better but I still don't have a good photo to use as a background for Ebbets. Trying to find period photos for old parks is almost impossible. Anyway, i should be finished with the updated parks this weekend.

[goreds05]

Originally Posted by adion

Okay. I don't have a 38-57 version. It may be an old version I did. Yes, the background is not good. It was the first one I did for Ebbets. I had a hard time finding something that look close to right. I am in the process of updating all the historical parks that Silvam has updated. That should fix will fix the grid issue. I can't fix yours because I don't have that one. I have adjusted the background so it looks better but I still don't have a good photo to use as a background for Ebbets. Trying to find period photos for old parks is almost impossible. Anyway, i should be finished with the updated parks this weekend.

Adion,
There are some old ballparks here that you may able
To use the backgrounds from.

http://s1266.photobucket.com/user/ariscotle/albums/

[silvam14]

Posted an Updated Astrodome circa 1965

- Fixed Crowd Textures
- Updated scoreboard in CF
- Added roof sections to give the park and enclosed feel
- Updated some textures in the CF bleachers area
- Updated 2D broadcast view image

Download here:

http://www.mediafire.com/file/1ibkal..._1965_v1_5.rar

[robedits]

http://s1266.photobucket.com/user/ar...ml?sort=9&o=25

adion...this is a great background for Ebbetts...not sure if it can be used with OOTP18,though...sicne I know nothing about 3D modeling.

[adion]

Originally Posted by robedits

http://s1266.photobucket.com/user/ar...ml?sort=9&o=25

adion...this is a great background for Ebbetts...not sure if it can be used with OOTP18,though...sicne I know nothing about 3D modeling.

I am not able to make a background of this.

[robedits]

Wasn't sure...I just saw it and loved it. As I said, you and sylvam are the 3D modeling "masters of the trade."

[robedits]

Just d-loaded it...it's great in-game...thank you!

Originally Posted by silvam14

Posted an Updated Astrodome circa 1965

- Fixed Crowd Textures
- Updated scoreboard in CF
- Added roof sections to give the park and enclosed feel
- Updated some textures in the CF bleachers area
- Updated 2D broadcast view image

Download here:

http://www.mediafire.com/file/1ibkal..._1965_v1_5.rar

[shaner_wils]

I have downloaded the Expos Labatt Stadium, but every time an Error will come up saying :unable to load the 3d model-unable to load park- load_stadium failed- loading default park not allowed..
I unzipped the file to the ball parks part on my finder but can't seem to get it to work. Is there a software I need to download to get this to work? Basically I have no idea what I'm doing and just wondering how I can get it to load.. Thank you

[adion]

Originally Posted by shaner_wils

I have downloaded the Expos Labatt Stadium, but every time an Error will come up saying :unable to load the 3d model-unable to load park- load_stadium failed- loading default park not allowed..
I unzipped the file to the ball parks part on my finder but can't seem to get it to work. Is there a software I need to download to get this to work? Basically I have no idea what I'm doing and just wondering how I can get it to load.. Thank you

The park folder needs to be in the Models folder and not part of some other folder.

[shaner_wils]

thanks for the quick reply.. I'm pretty sure thats where it is. When I click on Models it has every other mlb park and I dragged Labatt Park into it. Thats where I loaded it from on the game but when I clicked on 3d model that message pops up

[adion]

Originally Posted by shaner_wils

thanks for the quick reply.. I'm pretty sure thats where it is. When I click on Models it has every other mlb park and I dragged Labatt Park into it. Thats where I loaded it from on the game but when I clicked on 3d model that message pops up

I looked at it and it looks fine on my machine. However, I noticed that the background needed a little tweak. I fixed that and added it to my new versions of Silvam's v1.4 historical updates. It is available at the following location. Maybe your file got corrupted somehow. Try the new version.

https://www.mediafire.com/folder/0q4...D_Crowds_v1%2B

[shaner_wils]

I still can't get it, I'm almost ready to give up even though I really don't want too lol. I download it, drag it over to models with all the other ballparks.. Then when I submit it into 3d Model in the Pictures and Coordinates I can get it to load by changing it to a POD manually.. Not sure if thats what I'm supposed to do but thats the only way it appears.. So i do that but then when I go to the 3d Model tab that message pops up and I can't change it.. Is there a program/software I need to have to make it work or am I just screwed do you think?

[adion]

Originally Posted by shaner_wils

I still can't get it, I'm almost ready to give up even though I really don't want too lol. I download it, drag it over to models with all the other ballparks.. Then when I submit it into 3d Model in the Pictures and Coordinates I can get it to load by changing it to a POD manually.. Not sure if thats what I'm supposed to do but thats the only way it appears.. So i do that but then when I go to the 3d Model tab that message pops up and I can't change it.. Is there a program/software I need to have to make it work or am I just screwed do you think?

Did you download my latest version? If so, just unzip to the models folder or to the desktop and then copy it to the models folder. Once it is in the models folder you go to select Edit Ball parks then select Labat or whatever park name you have for Labat, then 3D model-select file and navigate to the Models folder then to the Labat folder and then select Labat .obj That's it. You do not have to change any file names.