StatsLab11 - Page 7

pbar25 · 11-19-2010, 12:37 PM

I recently changed the color of the html for my league within the header which also displays with StatsLab (the blue background/red letters - League Name/Home).....

Will I need to do a complete fresh install of StatsLab in order to have that change go into effect?
thanks

fhomess · 11-19-2010, 02:46 PM

Quote:

Originally Posted by pbar25

I recently changed the color of the html for my league within the header which also displays with StatsLab (the blue background/red letters - League Name/Home).....

Will I need to do a complete fresh install of StatsLab in order to have that change go into effect?
thanks

If you changed the setting inside OOTP, then StatsLab should pick it up when you do your next SQL dump. If you manually edited the HTML, then you should go into OOTP and do it internally instead. It's somewhere in League Setup (I think from one of the action menu items at the bottom of the screen, but I can't remember exactly where).

pbar25 · 11-19-2010, 03:24 PM

Quote:

Originally Posted by fhomess

If you changed the setting inside OOTP, then StatsLab should pick it up when you do your next SQL dump. If you manually edited the HTML, then you should go into OOTP and do it internally instead. It's somewhere in League Setup (I think from one of the action menu items at the bottom of the screen, but I can't remember exactly where).

geeez...Colors & Graphics....Edit League Colors & Logo....

Didn't even know that was possible without doing manual edit. I'd say that's a bit easier, thanks very much.

BleedingCubbyBlue · 11-22-2010, 05:14 PM

Can StatsLab be used for a contraction draft? We're looking at contracting a couple of teams in one of my leagues and would like to do a contraction draft from those players.

pbar25 · 11-23-2010, 07:57 PM

I have StatsLab installed and it runs very well.
The first time I set it up was with a test league to see if I could get it to work, and after a little while I had it up and running. Now I've switched to the 'real' file I want to use.

I guess my first question is can I just switch to a different league with the same setup -- albeit after changing the league id # & league name within the StatsLab Admin settings?

Everything points to that working out just fine....but my export tracker is goofed up graphically.
I've reuploaded the league's reports a couple of times, and I've reuploaded and updated the sql files a couple of times. All other graphics are just fine.

But I just can't seem to fix the html for the export tracker:
Export Tracker - StatsLab for OOTP11
I can't manufacture that report in game to see what the problem is, and just can't figure out where those images are coming from.

EDIT:FIXED

WillieMaysHayes · 12-06-2010, 11:52 PM

Sent a PM

I'm still having the "Player is not draft eligible" error.

pbar25 · 12-10-2010, 05:23 PM

I was wondering if it was possible to take advantage of the Login authentication capabilities of Stats Lab and add in a tab or simple html button (to the right of the User Configuration panel once logged in, same view for everybody) which would allow all owners to download the league file.
Is this something I could do on my own? I'd just need a nudge in the right direction I believe.

That way instead of building authentication on a website, one could keep the league file secure within StatsLab and owners only need to log into one place for everything they need.

fhomess · 12-10-2010, 06:54 PM

Quote:

Originally Posted by pbar25

I was wondering if it was possible to take advantage of the Login authentication capabilities of Stats Lab and add in a tab or simple html button (to the right of the User Configuration panel once logged in, same view for everybody) which would allow all owners to download the league file.
Is this something I could do on my own? I'd just need a nudge in the right direction I believe.

That way instead of building authentication on a website, one could keep the league file secure within StatsLab and owners only need to log into one place for everything they need.

Yeah, it'd be pretty easy to add to the StatsLab header. To do so, find the html_functions.php file in your StatsLab install. Save off a copy, then follow these steps:
1. Find the following line of code:

Code:

   echo "      <li><a href='".$htmlpath."/history/league_".$lgID."_index.html' class='menu'>History</a></li>\n";

2. Duplicate this line of code.
3. Edit the duplicate line of code to read the following, which contains the web address of your league file:

Code:

   echo "      <li><a href='http://www.yourdomain.com/path/league_file.tar.gz' class='menu'>League File</a></li>\n";

You'll now have a link to your league file in the StatsLab header.

Cooleyvol · 12-14-2010, 03:45 PM

Frank, how possible is it to somehow have a widget to use during drafts that would show the picks made in the most recent round and have it update itself as picks are made?

Cooleyvol · 12-14-2010, 03:46 PM

Quote:

Originally Posted by WillieMaysHayes

Sent a PM

I'm still having the "Player is not draft eligible" error.

We just had that in a league of mine. I don't know if this fixed it, but it became operational after I actioned (as commish) a cpu pick for the first pick of the draft, then reverted it.

fhomess · 12-14-2010, 07:03 PM

Quote:

Originally Posted by Cooleyvol

Frank, how possible is it to somehow have a widget to use during drafts that would show the picks made in the most recent round and have it update itself as picks are made?

That would be a relatively easy widget to write, I would think. I'll add it to my list of ideas for enhancements...

Quote:

Originally Posted by Cooleyvol

Quote:

Originally Posted by WillieMaysHayes

Sent a PM

I'm still having the "Player is not draft eligible" error.

We just had that in a league of mine. I don't know if this fixed it, but it became operational after I actioned (as commish) a cpu pick for the first pick of the draft, then reverted it.

With the latest patch for the draft module, the way to resolve this is to go to the draft admin page and (re)generate the auto draft list.

Cooleyvol · 12-14-2010, 09:17 PM

Whats the fix for no emails being sent?

I set up forwarding emails, so in statslab, only one address is listed.

Cooleyvol · 12-14-2010, 10:39 PM

No emails whatsoever. What are the settings on the server that need to be looked at? This is a new install.

Cooleyvol · 12-15-2010, 02:28 PM

Quote:

Originally Posted by Cooleyvol

No emails whatsoever. What are the settings on the server that need to be looked at? This is a new install.

Nevermind. Suddenly in mid first round, emails started being received. I did nothing to cause it.

DWK · 12-15-2010, 03:56 PM

Quote:

Originally Posted by Cooleyvol

Nevermind. Suddenly in mid first round, emails started being received. I did nothing to cause it.

Yeah I had this happen in my league too. It's like all of a sudden it catches up

Cooleyvol · 12-15-2010, 08:34 PM

Getting the following error when loading sql files. I get it only on load of pitching sql files. It finished up loading, but lists this error:

insert into `pla -> You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1

fhomess · 12-16-2010, 12:15 PM

Quote:

Originally Posted by Cooleyvol

Quote:

Originally Posted by Cooleyvol

Whats the fix for no emails being sent?

I set up forwarding emails, so in statslab, only one address is listed.

Nevermind. Suddenly in mid first round, emails started being received. I did nothing to cause it.

As with DWK, I've heard of other people having a similar problem. I'm really not sure what causes this behavior, so if anyone in OOTP land with more knowledge of emailing on servers knows of anything, let me know and I'll address it either with code or in the documentation.

Quote:

Originally Posted by Cooleyvol

Getting the following error when loading sql files. I get it only on load of pitching sql files. It finished up loading, but lists this error:

insert into `pla -> You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1

Could be a couple of things, but without seeing the full line of SQL syntax that's trying to get imported, I can't really tell. If you're not sure how to get that info, PM me a linke where I can download the SQL file that's causing the error and I'll try loading it myself.

Cooleyvol · 12-18-2010, 09:27 AM

When the timer is set for example, 2 hours and turns off for the night halfway through that two hours, why does it give the team a fresh timer starting when it turns back on in the morning?

EXAMPLE:

2 hour timer. Off at 10pm; on at 8am.
Pick made at 9pm. Next pick is due at 10am the next morning when it should be 9am the next morning.

WillieMaysHayes · 12-18-2010, 11:29 PM

One issue I am having - on the email draft list, it doesn't seem like there is enough room for me to put all 24 email addresses in there. I have been changing managers in and out but it only seems like half of the league's emails show up in the box after I hit "save" to lock them in.

Cooleyvol · 12-18-2010, 11:55 PM

There's a character limit. Set up a forwarding email that will forward to the owner email list.

11-19-2010, 12:37 PM	#121
pbar25 Major Leagues Join Date: Mar 2007 Posts: 343	I recently changed the color of the html for my league within the header which also displays with StatsLab (the blue background/red letters - League Name/Home)..... Will I need to do a complete fresh install of StatsLab in order to have that change go into effect? thanks __________________ New York Mets - Asahi2 Baseball

11-22-2010, 05:14 PM	#124
BleedingCubbyBlue All Star Reserve Join Date: Jun 2003 Location: Gurnee, IL Posts: 601	Can StatsLab be used for a contraction draft? We're looking at contracting a couple of teams in one of my leagues and would like to do a contraction draft from those players. __________________ http://www.otbaonline.com

11-23-2010, 07:57 PM	#125
pbar25 Major Leagues Join Date: Mar 2007 Posts: 343	I have StatsLab installed and it runs very well. The first time I set it up was with a test league to see if I could get it to work, and after a little while I had it up and running. Now I've switched to the 'real' file I want to use. I guess my first question is can I just switch to a different league with the same setup -- albeit after changing the league id # & league name within the StatsLab Admin settings? Everything points to that working out just fine....but my export tracker is goofed up graphically. I've reuploaded the league's reports a couple of times, and I've reuploaded and updated the sql files a couple of times. All other graphics are just fine. But I just can't seem to fix the html for the export tracker: Export Tracker - StatsLab for OOTP11 I can't manufacture that report in game to see what the problem is, and just can't figure out where those images are coming from. EDIT:FIXED __________________ New York Mets - Asahi2 Baseball Last edited by pbar25; 11-25-2010 at 03:08 AM. Reason: fixed

12-10-2010, 05:23 PM	#127
pbar25 Major Leagues Join Date: Mar 2007 Posts: 343	I was wondering if it was possible to take advantage of the Login authentication capabilities of Stats Lab and add in a tab or simple html button (to the right of the User Configuration panel once logged in, same view for everybody) which would allow all owners to download the league file. Is this something I could do on my own? I'd just need a nudge in the right direction I believe. That way instead of building authentication on a website, one could keep the league file secure within StatsLab and owners only need to log into one place for everything they need. __________________ New York Mets - Asahi2 Baseball

12-06-2010, 11:52 PM	#126
WillieMaysHayes Minors (Double A) Join Date: Jul 2010 Location: Denver, CO Posts: 143	Sent a PM I'm still having the "Player is not draft eligible" error.

12-14-2010, 03:45 PM	#129
Cooleyvol Hall Of Famer Join Date: Dec 2001 Location: Union City, TN Posts: 6,383	Frank, how possible is it to somehow have a widget to use during drafts that would show the picks made in the most recent round and have it update itself as picks are made?

12-14-2010, 09:17 PM	#132
Cooleyvol Hall Of Famer Join Date: Dec 2001 Location: Union City, TN Posts: 6,383	Whats the fix for no emails being sent? I set up forwarding emails, so in statslab, only one address is listed.

12-14-2010, 10:39 PM	#133
Cooleyvol Hall Of Famer Join Date: Dec 2001 Location: Union City, TN Posts: 6,383	No emails whatsoever. What are the settings on the server that need to be looked at? This is a new install.

12-15-2010, 08:34 PM	#136
Cooleyvol Hall Of Famer Join Date: Dec 2001 Location: Union City, TN Posts: 6,383	Getting the following error when loading sql files. I get it only on load of pitching sql files. It finished up loading, but lists this error: insert into `pla -> You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1

12-18-2010, 09:27 AM	#138
Cooleyvol Hall Of Famer Join Date: Dec 2001 Location: Union City, TN Posts: 6,383	When the timer is set for example, 2 hours and turns off for the night halfway through that two hours, why does it give the team a fresh timer starting when it turns back on in the morning? EXAMPLE: 2 hour timer. Off at 10pm; on at 8am. Pick made at 9pm. Next pick is due at 10am the next morning when it should be 9am the next morning.

12-18-2010, 11:29 PM	#139
WillieMaysHayes Minors (Double A) Join Date: Jul 2010 Location: Denver, CO Posts: 143	One issue I am having - on the email draft list, it doesn't seem like there is enough room for me to put all 24 email addresses in there. I have been changing managers in and out but it only seems like half of the league's emails show up in the box after I hit "save" to lock them in.

12-18-2010, 11:55 PM	#140
Cooleyvol Hall Of Famer Join Date: Dec 2001 Location: Union City, TN Posts: 6,383	There's a character limit. Set up a forwarding email that will forward to the owner email list.